Last Modified: 11-29-2007 1.6 A
Service Category: Audio/Visual/Telematics Section: Navigation/Multi Info Display
Model Year: 2008 Model: Sequoia Doc ID: RM000002ZVE003X
Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ANTENNA: REMOVAL (2008 Sequoia)

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:

When disconnecting the cable some systems need to be initialized after the cable is reconnected INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION (2008 Sequoia) .

2. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY

(a) Remove the instrument panel INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia) .

3. REMOVE NO. 1 HEATER TO REGISTER DUCT INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+

4. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+

5. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+

6. REMOVE DEFROSTER NOZZLE ASSEMBLY INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+

7. REMOVE NAVIGATION ANTENNA ASSEMBLY

(a) Disengage the clamp.

(b) Remove the 2 screws and antenna.